top of page

Journal Publications

International Journal Publications

​

  1. Noh, G., Sharma, G., Kim, H., Das, K.K., Jang, J.G., Park, J.-J., Lee, N.K. (2024). "Physicochemical properties of CO2-cured belite-rich cement with electric arc furnace reduction slag as a partial replacement", Developments in the Built Environment, Vol. 20, 100564, https://doi.org/10.1016/j.dibe.2024.100564.
     

  2. Das, K.K., Pei, J., Sharma, R., Wu, X., Jang, J.G. (2024). "Influence of silica fume and lime on belite-rich cement paste subjected to atmospheric and autoclave CO2 curing regime", Construction and Building Materials, Vol. 436, 136909, https://doi.org/10.1016/j.conbuildmat.2024.136909.
     

  3. Das, K.K., Sharma, R., Wu, X., Lee, J.-H., Jang, J.G. (2024). "Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement", Case Studies in Construction Materials, Vol. 20, e03251, https://doi.org/10.1016/j.cscm.2024.e03251.
     

  4. Ansari, A., Lee, J.-H., Jang, J.G., Allugmani, A.E. (2024). “Seismic microzonation of North Gyeongsang (South Korea) considering liquefaction potential: Application towards seismic risk assessment for Korean nuclear power plants”, Soil Dynamics and Earthquake Engineering, Vol. 182, 108679, https://doi.org/10.1016/j.soildyn.2024.108679. 
     

  5. Kim, H., Sharma, R., Jang, J.G. (2024). “Assessment of the physicochemical properties of alkali-activated slag blended with belite-rich cement subjected to carbonation attack”, Construction and Building Materials, Vol. 424, 135921, https://doi.org/10.1016/j.conbuildmat.2024.135921. 
     

  6. Sharma, R., Das, K.K., Siddique, S., Jang, J.G. (2024). "Cesium immobilization of high pH and low pH belite-rich cement under varying temperature", Journal of Hazardous Materials, Vol. 469, 133995, https://doi.org/10.1016/j.jhazmat.2024.133995.
     

  7. Bae, J.-H., Kil, T., Cho, G., Jang, J.G., Yang, B. (2024). "Hierarchical multiscale modeling for predicting the physicochemical characteristics of construction materials: A review", Computers and Concrete, Vol. 33, No. 3, pp. 325-340, https://doi.org/10.12989/cac.2024.33.3.325.
     

  8. Das, K.K., Lam, E.S-S., Ip, C.T., Chau, Y.K., Jang, J.G. (2024). "Modified pull-off test evaluation of bond properties in preplaced aggregate concrete incorporating silica fume", Journal of Building Engineering, Vol.82, 108264, https://doi.org/10.1016/j.jobe.2023.108264. 
     

  9. Das, K.K., Sharma, R., Wu, X., Jang, J.G. (2024). "Influence of hygiene tissue paper used as an additive on the physicochemical and mechanical properties of CO2-cured belite-rich cement paste", Cement and Concrete Composites, Vol.145, 105317, https://doi.org/10.1016/j.cemconcomp.2023.105317.
     

  10. Sharma, R., Das, K.K.,  Pei, J., Jang, J.G. (2023). "Influence of sillimanite sand and corundum sand on the mechanical property, durability and pore structure of cement mortar", Journal of Building Engineering, Vol.80, 108091, https://doi.org/10.1016/j.jobe.2023.108091.
     

  11. Miah, M.J., Huaping, R., Paul, S.C., Babafemi, A.J., Sharma, R., Jang, J.G. (2023). "Performance of eco-friendly concrete made from recycled waste tire fine aggregate as a replacement for river sand", Structures, Vol. 58, 105463, https://doi.org/10.1016/j.istruc.2023.105463. 
     

  12. Miah, M.J., Pei, J., Kim, H., Jang, J.G. (2023). "Role of fiber dosages and lengths on the mechanical strength, shrinkage, and pore structure of CO2-cured amorphous metallic-fiber-reinforced belite-rich cement composites", Journal of Building Engineering, Vol. 79, 107752, https://doi.org/10.1016/j.jobe.2023.107752. 
     

  13. Das, K.K., Sharma, R., Dutta, S., Seo, J., Jang, J.G. (2023). "Effects of curing regime, cement type, and water-to-cement ratio on the physicochemical, mechanical, and hydraulic properties of pervious mortar", Construction and Building Materials, Vol. 401, 132897, https://doi.org/10.1016/j.conbuildmat.2023.132897. 
     

  14. Das, K.K., Lam, E. S.-S., Jang, J.G. (2023). "An empirical relationship for compressive strength of preplaced aggregate concrete with modified binder", Computers and Concrete, Vol. 31, No. 6, pp.545-559, https://doi.org/10.12989/cac.2023.31.6.545.                                                                                                             

  15. Jang, D., Yoon, H.N., Seo, J., Yang, B., Jang, J.G., Park, S.M. (2023). "Effect of carbonation curing regime on electric heating performance of CNT/cement composites", Journal of Building Engineering, Vol. 73, 106815, https://doi.org/10.1016/j.jobe.2023.106815. 
     

  16. Miah, M.J., Pei, J., Kim, H., Jang, J.G. (2023). "Flexural behavior, porosity, and water absorption of CO2-cured amorphous metallic-fiber-reinforced belite-rich cement composites", Construction and Building Materials, Vol. 387, 131668, https://doi.org/10.1016/j.conbuildmat.2023.131668. 
     

  17. Shin, Y., Jang, J.G., Choi, J., Jun, G., Park, C., Kim, G.M., Yang, B. (2023). "Utilization of artificial interior stone sludge as fine aggregate in controlled low-strength material (CLSM)", Journal of Building Engineering, Vol.71, 106441, https://doi.org/10.1016/j.jobe.2023.106441. 
     

  18. Sharma, R., Pei, J., Jang, J.G. (2023). "Microstructural evolution of belite-rich cement mortar subjected to water, carbonation, and hybrid curing regime", Cement and Concrete Composites, Vol.139, 105028, https://doi.org/10.1016/j.cemconcomp.2023.105028.     
     

  19. Park, S.M., Lothenbach, B., Jang, J.G., Kim, H.-K., Lee, N.K. (2023). "Thermodynamic modeling and experimental study of carbonation of alkali-activated slag cements", ACS Sustainable Chemistry & Engineering, Vol. 11, Issue 10, pp. 4049-4063, https://doi.org/10.1021/acssuschemeng.2c05789.
     

  20. Das, K.K., Lam, E.S.-S., Jang, J.G. (2023). "Effects of modified binders on flowability of grout and properties of preplaced aggregate concrete", Journal of Building Engineering, Vol. 68, 106235, https://doi.org/10.1016/j.jobe.2023.106235. 
     

  21. Sharma, R., Pei, J., Miah, M.J., Jang, J.G. (2023). "Effect of sillimanite sand on the mechanical property and thermal resistance of alkali-activated slag mortar", Construction and Building Materials, Vol. 370, 130654, https://doi.org/10.1016/j.conbuildmat.2023.130654.
     

  22. Miah, M.J., Pei, J., Kim, H., Sharma, R., Jang, J.G., Ahn, J. (2023). "Property assessment of an eco-friendly mortar reinforced with recycled mask fiber derived from COVID-19 single-use face masks", Journal of Building Engineering, Vol. 66, 105885, https://doi.org/10.1016/j.jobe.2023.105885.
     

  23. Jin, X., Haider, M.Z., Cui, Y., Jang, J.G., Kim, Y., Fang, G., Hu, J. (2023). "Development of nanomodified self-healing mortar and a U-Net model based on semantic segmentation for crack detection and evaluation", Construction and Building Materials, Vol. 365, 129985, https://doi.org/10.1016/j.conbuildmat.2022.129985. 
     

  24. Miah, M.J., Li, Y., Paul, S.C., Babafemi, A.J., Jang, J.G. (2023). "Mechanical strength, shrinkage, and porosity of mortar reinforced with areca nut husk fibers", Construction and Building Materials, Vol. 363, 129688, https://doi.org/10.1016/j.conbuildmat.2022.129688.
     

  25. Sharma, R., Kim, H., Pei, J., Jang, J.G. (2023). "Dimensional stability of belite-rich cement subject to early carbonation curing", Journal of Building Engineering, Vol. 63, 105545, https://doi.org/10.1016/j.jobe.2022.105545.
     

  26. Sharma, R., Kim, H., Lee, N.K., Park, J.J., Jang, J.G. (2023). "Microstructural characteristics and CO2 uptake of calcium sulfoaluminate cement by carbonation curing at different water-to-cement ratios", Cement and Concrete Research, Vol. 163, 107012, https://doi.org/10.1016/j.cemconres.2022.107012. 
     

  27. Jang, D., Bang, J., Yoon, H.N., Seo, J., Jung, J., Jang, J.G., Yang, B. (2022). “Deep learning-based LSTM model for prediction of long-term piezoresistive sensing performance of cement-based sensors incorporating multi-walled carbon nanotube”, Computers and Concrete, Vol. 30, No. 5, pp. 301-310, https://doi.org/10.12989/cac.2022.30.5.301.
     

  28. Seo, J.H., Jang, D., Yang, B., Yoon, H.N., Jang, J.G., Park, S., Lee, H.K. (2022). "Material characterization and piezoresistive sensing capability assessment of thin-walled CNT-embedded ultra-high performance concrete", Cement and Concrete Composites, Vol.134, 104808, https://doi.org/10.1016/j.cemconcomp.2022.104808. 
     

  29. Sharma, R., Pei, J., Jang, J.G. (2022). “Resistance of carbonation-cured belite-rich cement mortar to adverse environments: Magnesium sulfate and sulfuric acid exposure", Cement and Concrete Composites, Vol.134, 104781, https://doi.org/10.1016/j.cemconcomp.2022.104781.
     

  30. Miah, M.J., Babafemi, A.J.,Paul, S.C., Kong, S., Li, Y., Jang, J.G. (2022). "Eco-friendly concrete with chemically treated end-of-life tires: Mechanical strength, shrinkage, and flexural performance of RC beams", Construction and Building Materials, Vol. 351, 128970, https://doi.org/10.1016/j.conbuildmat.2022.128970.
     

  31. Miah, M.J., Babafemi, A.J., Li, Y., Kong, S., Paul, S.C., Jang, J.G. (2022). "Impact of overburnt distorted brick aggregate on the performance of concrete at ambient temperature and after exposure to elevated temperatures", Construction and Building Materials, Vol. 349, 128792, https://doi.org/10.1016/j.conbuildmat.2022.128792.
     

  32. Kim, H., Sharma, R., Pei, J., Jang, J.G. (2022). “Effect of carbonation curing on physicochemical properties of mineral admixture blended belite-rich cement”, Journal of Building Engineering, Vol. 56, 104771, https://doi.org/10.1016/j.jobe.2022.104771. 
     

  33. Seo, J.H., Nawaz, A., Jang, J.G., Lee, H.K. (2022). "Modifications in hydration kinetics and characteristics of calcium aluminate cement upon blending with calcium sulfoaluminate cement", Construction and Building Materials, Vol. 342, Part A, 127958, https://doi.org/10.1016/j.conbuildmat.2022.127958.
     

  34. Kim, H., Siddique, S., Jang, J.G. (2022). “Effect of carbonation curing on the mechanical properties of belite-rich cement mortar exposed to elevated temperatures”, Journal of Building Engineering, Vol. 52, Issue 15, 104453, https://doi.org/10.1016/j.jobe.2022.104453.
     

  35. Sharma, R., Jang, J.G. Hu, J. (2022). "Phase-change materials in concrete: Opportunities and challenges for sustainable construction and building materials", Materials, Vol. 15, Issue 1, 335, https://doi.org/10.3390/ma15010335. 
     

  36. Pei, J., Sharma, R., Jang, J.G. (2022). "Use of carbonated Portland cement clinkers as a reactive or non-reactive aggregate for the production of cement mortar", Construction and Building Materials, Vol. 319, 126070, https://doi.org/10.1016/j.conbuildmat.2021.126070. 
     

  37. Sharma, R., Jang, J.G., Bansal, P.P., (2022). "A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete", Journal of Building Engineering, Vol. 45, 103314, https://doi.org/10.1016/j.jobe.2021.103314.
     

  38. Siddique, S., Gupta, V., Chaudhary, S., Park, S., Jang, J.G. (2021). "Influence of the precursor, molarity and temperature on the rheology and structural buildup of alkali-activated materials", Materials, Vol. 14, Issue 13, 3590, https://doi.org/10.3390/ma14133590.
     

  39. Kim, H., Pei, J., Siddique, S., Jang, J.G. (2021). “Effects of the curing conditions on the carbonation curing efficiency of ordinary portland cement and a belite-rich cement mortar”, Sustainability, Vol. 13, Issue 9, 5175, https://doi.org/10.3390/su13095175.
     

  40. Siddique, S., Jang, J.G., Gupta.T. (2021). “Developing marble slurry as supplementary cementitious material through calcination: Strength and microstructure study”, Construction and Building Materials, Vol. 293, 123474, https://doi.org/10.1016/j.conbuildmat.2021.123474.
     

  41. Siddique, S., Kim, H., Jang, J.G. (2021). “Properties of high-volume slag cement mortar incorporating circulating fluidized bed combustion fly ash and bottom ash”, Construction and Building Materials, Vol. 289, 123150, https://doi.org/10.1016/j.conbuildmat.2021.123150.
     

  42. Siddique, S., Jang, J.G. (2021). "Acid and sulfate resistance of seawater based alkali activated fly ash: A sustainable and durable approach", Construction and Building Materials, Vol. 281, 122601, https://doi.org/10.1016/j.conbuildmat.2021.122601. 
     

  43. Siddique, S., Kim, H., Son, H., Jang, J.G. (2021) "Characteristics of preplaced aggregate concrete fabricated with alkali-activated slag/fly ash cements", Materials, Vol.14, Issue 3, 591, https://doi.org/10.3390/ma14030591.
     

  44. Yang, B., Jang, J.G. (2020). “Environmentally benign production of one-part alkali-activated slag with calcined oyster shell as an activator”, Construction and Building Materials, Vol. 257, 119552, https://doi.org/10.1016/j.conbuildmat.2020.119552.
     

  45. Siddique, S., Naqi, A., Jang, J.G. (2020). “Influence of water to cement ratio on CO2 uptake capacity of belite-rich cement upon exposure to carbonation curing”, Cement and Concrete Composites, Vol. 111, 103616, https://doi.org/10.1016/j.cemconcomp.2020.103616. 
     

  46. Siddique, S., Jang, J.G. (2020). “Mechanical properties, microstructure and chloride content of alkali-activated fly ash made with sea water”, Materials, Vol. 13, Issue 6, 1467, https://doi.org/10.3390/ma13061467. 
     

  47. Siddique, S., Jang, J.G. (2020). “Assessment of molybdenum mine tailings as filler in cement mortar”, Journal of Building Engineering, Vol. 31, 101322, https://doi.org/10.1016/j.jobe.2020.101322. 
     

  48. Siddique, S., Jang, J.G. (2020). “Effect of CFBC ash as partial replacement of PCC ash in alkali-activated material”, Construction and Building Materials, Vol. 244, 118383, https://doi.org/10.1016/j.conbuildmat.2020.118383. 
     

  49. Park, S.M., Yoon, H.N., Seo, J.H., Lee, H.K., Jang, J.G. (2020). “Structural evolution of binder gel in alkali-activated cements exposed to electrically accelerated leaching conditions”, Journal of Hazardous Materials, Vol. 387, 121825, https://doi.org/10.1016/j.jhazmat.2019.121825.
     

  50. Naqi, A., Siddique, S., Kim, H.-K., Jang, J.G. (2020). "Examining the potential of calcined oyster shell waste as additive in high volume slag cement", Construction and Building Materials, Vol. 230, 116973, https://doi.org/10.1016/j.conbuildmat.2019.116973.
     

  51. Seo, J.H., Park, S.M., Yoon, H.N., Jang, J.G., Kim, S.H., Lee, H.K. (2019). “Utilization of calcium carbide residue using granulated blast furnace slag”, Materials, Vol. 12, Issue 21, 3511, https://doi.org/10.3390/ma12213511.
     

  52. Cho, J., Lee, S.-K., Eem, S.-H., Jang, J.G., Yang, B. (2019). “Enhanced mechanical and thermal properties of carbon fiber-reinforced thermoplastic polyketone composites”, Composites Part A: Applied Science and Manufacturing, Vol. 126, 105599, https://doi.org/10.1016/j.compositesa.2019.105599.
     

  53. Kim, H.-K., Song, K.-I., Song, J.-K., Jang, J.G. (2019). “Effect of carbonation on abrasion resistance of alkali-activated slag with various activators”, Materials, Vol. 12, Issue 17, 2812; https://doi.org/10.3390/ma12172812.
     

  54. Seo, J.H., Park, S.M., Yang, B.J., Jang, J.G. (2019). “Calcined oyster shell powder as an expansive additive in cement mortar”, Materials, Vol. 12, Issue 8, 1322, https://doi.org/10.3390/ma12081322.
     

  55. Naqi, A., Jang, J.G. (2019). "Recent progress in green cement technology utilizing low-carbon emission fuels and raw materials: A review", Sustainability, Vol. 11, Issue 2, 537, https://doi.org/10.3390/su11020537.                                                                                                   

  56. Park, S.M., Khalid, H.R., Seo, J.H., Yoon, H.N., Son, H.M., Kim, S.H., Lee, N.K., Lee, H.K., Jang, J.G. (2018). “Pressure-induced geopolymerization in alkali-activated fly ash”, Sustainability, Vol. 10, Issue 10, 3538, https://doi.org/10.3390/su10103538.
     

  57. Park, S.M., Jang, J.G., Lee, H.K. (2018). "Unlocking the role of MgO in the carbonation of alkali-activated slag cement", Inorganic Chemistry Frontiers, Vol. 5, pp. 1661-1670.
     

  58. Park, S.M., Jang, J.G. (2018). “Carbonation-induced weathering effect on cesium retention of cement paste” , Journal of Nuclear Materials, Vol. 505, pp. 159-164.​
     

  59. Son, H.M., Park, S.M., Jang, J.G., Lee, H.K. (2018). “Effect of nano-silica on hydration and conversion of calcium aluminate cement”, Construction and Building Materials, Vol. 169, pp. 819-825.
     

  60. Jang, J.G., Park, S.M., Chung, S., Ahn, J.W., Kim, H.K. (2018). “Utilization of circulating fluidized bed combustion ash in producing controlled low-strength materials with cement or sodium carbonate as activator”, Construction and Building Materials, Vol. 159, pp. 642-651.
     

  61. Park, S.M., Jang, J.G., Son, H.M., Lee, H.K. (2017). “Stable conversion of metastable hydrates in calcium aluminate cement by early carbonation curing”, Journal of CO2 Utilization, Vol. 21, pp. 224-226.
     

  62. Jang, J.G., Park, S.M., Kim, G.M., Lee, H.K. (2017). “Stability of MgO-modified geopolymeric gel structure exposed to a CO2-rich environment”, Construction and Building Materials, Vol. 151, pp. 178-185.
     

  63. Jang, J.G., Park, S.M., Lee, H.K. (2017). “Cesium and strontium retentions governed by aluminosilicate gel in alkali-activated cements”, Materials, Vol. 10, Issue. 4, 447, https://doi.org/10.3390/ma10040447.
     

  64. Kim, G.M., Jang, J.G., Hammad, K.R., Lee, H.K. (2017). “Water purification characteristics of pervious concrete fabricated with CSA cement and bottom ash aggregates”, Construction and Building Materials, Vol. 136, pp. 1-8.
     

  65. Jang, J.G., Kim, G.M., Kim, H.J., Lee, H.K. (2016). “Review on recent advances in CO2 utilization and sequestration technologies in cement-based materials”, Construction and Building Materials, Vol. 127, pp. 762-773.
     

  66. Park, S.M., Jang, J.G., Lee, N.K., Lee, H.K. (2016). “Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures”, Cement and Concrete Research, Vol. 89, pp. 72-79.
     

  67. Jang, J.G., Park, S.M., Lee, H.K. (2016). “Physical barrier effect of geopolymeric waste form on diffusivity of cesium and strontium”, Journal of Hazardous Materials, Vol. 318, pp. 339-346.
     

  68. Kim, H.K., Jang, J.G., Lim, M.J., Cho, C.G. (2016). “Effect of fiber addition on fresh and hardened properties of spun cast concrete”, Construction and Building Materials, Vol. 125, pp. 306-315.
     

  69. Ahn, Y.B., Jang, J.G., Lee, H.K. (2016). “Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures”, Cement and Concrete Composites, Vol. 72, pp. 27-38.
     

  70. Park, S.M., Jang, J.G., Chae, S.A., Lee, H.K. (2016). “An NMR spectroscopic investigation of aluminosilicate gel in alkali-activated fly ash in a CO2-rich environment”, Materials, Vol. 9, Issue 5, 308, https://doi.org/10.3390/ma9050308.
     

  71. Kim, B.J., Jang, J.G., Park, C.Y., Han, O.H., Kim, H.K. (2016). “Recycling of arsenic-rich mine tailings in controlled low-strength materials”, Journal of Cleaner Production, Vol. 118, pp. 151-161.
     

  72. Jang, J.G., Lee, H.K. (2016). “Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement”, Cement and Concrete Research, Vol. 82, pp. 50-57.
     

  73. Jang, J.G., Kim, H.J., Kim, H.K., Lee, H.K. (2016). “Resistance of coal bottom ash mortar against coupled-deterioration of carbonation and chloride penetration”, Materials & Design, Vol. 93, pp. 160-167.
     

  74. Jang, J.G., Lee, H.K. (2016). “Effect of fly ash characteristics on delayed high-strength development of geopolymers”, Construction and Building Materials, Vol. 102, pp. 260-269.
     

  75. Kim, G.M., Jang, J.G., Naeem, F., Lee, H.K. (2015). “Heavy metal leaching, CO2 uptake and mechanical characteristics of carbonated porous concrete with alkali-activated slag and bottom ash”, International Journal of Concrete Structures and Materials, Vol. 9, No. 3, pp. 283-294.
     

  76. Jang, J.G., Kim, H.J., Park, S.M., Lee, H.K. (2015). “The influence of sodium hydrogen carbonate on the hydration of cement”, Construction and Building Materials, Vol. 94, pp. 746-749.
     

  77. Jang, J.G., Ahn, Y.B., Hamid, S., Lee, H.K. (2015). “A novel eco-friendly porous concrete fabricated with coal ash and geopolymeric binder: Heavy metal leaching characteristics and compressive strength”, Construction and Building Materials, Vol. 79, pp. 173-181.
     

  78. Yang, B.J., Na, S., Jang, J.G., Kim, H.K., Lee, H.K. (2015). “Thermo-mechanical analysis of road structures used in the on-line electric vehicle system”, Structural Engineering and Mechanics, Vol. 53, No.3, pp. 519-536.
     

  79. Ha, S.K., Jang, J.G., Park, S.H., Lee, H.K. (2015). “Advanced spray multiple layup process for quality control of sprayed FRP composites used to retrofit concrete structures”, Journal of Construction Engineering and Management, Vol. 141, Issue 1, https://doi.org/10.1061/(ASCE)CO.1943-7862.0000905.
     

  80. Kim, H.K., Jang, J.G., Choi, Y.C., Lee, H.K. (2014). “Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing”, Construction and Building Materials, Vol. 71, pp. 334-343.
     

  81. Lee, N.K., Jang, J.G., Lee, H.K. (2014). “Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages”, Cement and Concrete Composites, Vol. 53, pp. 239-248.
     

  82. Park, S.J., Jang, J.G., Lee, H.K. (2014). “Computational investigation of the neutron shielding and activation characteristics of borated concrete with polyethylene aggregate”, Journal of Nuclear Materials, Vol. 452, Issues 1-3, pp. 205-211.
     

  83. Jang, J.G., Kim, H.K., Kim, T.S., Min, B.J., Lee, H.K. (2014). “Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles”, Construction and Building Materials, Vol. 59, pp. 129-135.
     

  84. Jang, J.G., Lee, N.K., Lee, H.K. (2014). “Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers”, Construction and Building Materials, Vol. 50, pp. 169-176.

Domestic Journal Publications

  1. Jang, J.G., Ji, S., Ahn, J.-W. (2017). “Utilization of circulating fluidized bed combustion ash and related specifications for mine backfills”, Journal of the Korean Institute of Resources Recycling, Vol. 26, No. 2, pp. 71-79.
     

  2. Park, S.M., Jang, J.G., Kim, G.M., Lee, H.K. (2016). “Strength development of alkali-activated fly ash exposed to carbon dioxide-rich environment at early age”, Journal of the Korean Ceramic Society, Vol. 53, No. 1, pp. 18-23. 
     

  3. Kim, H.K., Ha, K.A., Jang, J.G., Lee, H.K. (2014). “Mechanical and chemical characteristics of bottom ash aggregates cold-bonded with fly ash”, Journal of the Korean Ceramic Society, Vol. 51, No. 2, pp. 57-63. (in Korean) 
     

  4. Saito, T., Jang, J.G., Lee, Y.S., Otsuki, N. (2011). “MgSO4 resistance of blast furnace slag cement with anhydrite and limestone powder, and material design for sulfate attack”, Cement Science and Concrete Technology, Vol. 65, pp. 168-175. (in Japanese)

bottom of page